COMMERCIAL FLAT ROOF RESTORATION
Commercial flat roof restoration — without the tear-off.
Seamless coating systems that waterproof TPO, EPDM, built-up, and modified bitumen roofs and add 20+ years — while your business keeps running below.
COMMERCIAL FLAT ROOF RESTORATION
Seamless coating systems that waterproof TPO, EPDM, built-up, and modified bitumen roofs and add 20+ years — while your business keeps running below.
CERTIFIED & ACCREDITED
Renewable warranty
Saved vs. replacement
Days of downtime
Tax-deductible
WHERE FLAT ROOFS FAIL
Low-slope roofs rarely fail all at once. They fail at the weak points — and a restoration coating seals every one of them under a single seamless membrane, so water has nowhere left to get in.
Where panels and sheets meet is the first place water gets in.
Standing water breaks down membranes and lesser coatings.
Years of sun dry out, crack, and shrink an aging membrane.
Curbs, drains, and penetrations crack and leak over time.
EVERY LOW-SLOPE MEMBRANE
Every seam, fastener and penetration is completely sealed with materials designed to restist ponding water for decades, resulting in a leak free roof.
Single-ply thermoplastic — seams sealed and recoated.
Rubber membranes cleaned, primed, and waterproofed.
Mod-bit and torch-down roofs sealed and coated.
Gravel and asphalt built-up roofs restored and sealed.
Rusted or leaking metal — see our metal restoration.
MATCHED TO YOUR ROOF
We spec the system to your membrane, slope, and drainage — then tell you exactly why. Here’s where each one fits.
For ponding water and the longest life.
For top reflectivity on a tighter budget.
For rusted or leaking low slope metal roofs.
HOW IT'S DONE
Pressure-wash the roof
Replace damaged material
Seams, laps & penetrations
Prime the full surface
Apply the coating system
Issue manufacturer warranty
SEE THE DIFFERENCE
QUESTIONS, ANSWERED
Yes. We restore all low-slope membranes — TPO, EPDM, modified bitumen, and built-up (BUR) — by cleaning, reinforcing the seams, and sealing the whole roof under one coating system.
For ponding-prone roofs we specify a silicone system, the only coating that holds up to permanent standing water without breaking down.
Every seam, lap, drain, and penetration is reinforced and sealed before the coating goes on — that’s where flat roofs leak first, so it’s where restoration starts.
Typically 50%+ less than a tear-off and replacement, and because it’s a maintenance-class expense, Section 179 lets eligible businesses deduct the full cost the year it’s installed.
It depends on your membrane, slope, and drainage. After a free inspection we recommend the right system — silicone, acrylic, or a metal system — and explain exactly why.
No. There’s no tear-off, no interior exposure, and no downtime — your operations continue underneath while we work.
We’ll inspect your roof, provide a detailed report, and recommend the right coating system — with a clear estimate, at no cost.