COMMERCIAL METAL ROOF RESTORATION
Metal roof restoration that stops rust and leaks for good.
We seal every seam, screw, and rust spot under a waterproof coating — no costly tear-off and it’s backed by a 20-year warranty.
COMMERCIAL METAL ROOF RESTORATION
We seal every seam, screw, and rust spot under a waterproof coating — no costly tear-off and it’s backed by a 20-year warranty.
CERTIFIED & ACCREDITED
Renewable warranty
Saved vs. re-roof
Days of downtime
Tax-deductible
WHAT KILLS A METAL ROOF
A metal roof rarely fails across the panels — it fails at the thousands of screws, seams, and edges where movement and moisture do their work.
Once the finish fails, rust spreads and eats through the panel.
Thermal movement loosens screws until every one becomes a leak.
Laps and seams open from heat expansion letting water under the panels.
Constant expansion and contraction stresses seams and fasteners.
HOW IT'S DONE
Wash and treat the rust
Upsized, sealed screws
Laps & penetrations
Rust-inhibitive base
Reflective topcoat
20-year coverage
EVERY METAL PROFILE
We restore every profile of commercial metal roof. Most are finished with an acrylic coating for lasting waterproofing unless the roof has extensive ponding, in that case we suggest silicone.
Raised-seam panels sealed and recoated.
Screw-down panels resealed at every fastener.
Aging retrofit roofs restored without a tear-off.
Large-format industrial and agricultural roofs.
SEE THE DIFFERENCE
QUESTIONS, ANSWERED
Yes. We clean and treat the rust with an inhibitive primer before coating, which stops the corrosion and keeps it from coming back.
Every failed fastener is replaced with a larger, gasketed screw and sealed — the loose original screws are the #1 source of metal-roof leaks.
Yes — standing seam, corrugated / R-panel, metal-over-metal retrofits, and large warehouse or agricultural roofs.
Typically 50%+ less than re-roofing, with no tear-off of your panels, and it’s deductible the year it’s installed under Section 179.
Usually a silicone or reflective elastomeric system, matched to your roof and climate. We recommend the right one after a free inspection.
Yes — seams, laps, fasteners, and penetrations are all sealed under one seamless membrane, backed by a 20-year warranty.
Further reading: metal roof restoration with coatings, including seam and fastener treatment, on Roof Coating Network.
We’ll inspect your metal roof, provide a detailed report, and send a clear estimate — at no cost.